How to unlock your ios 10 device with a single click (like in ios 9)

In iOS 10, Apple made a small but fundamental change to the way touch ID users unlock their iPhone. If you’ re tired of seeing “Press home to open” or “Press home to unlock” every time to you grab your phone, here’ s how to switch it back to the way it was in iOS 9. ( Don’t want miss this tips: How to Improve the Response Speed of Home Button on iPhone 7 )

Changing the behavior of the Touch ID unlock is trivial if you know where to look. To change the functionality back to the iOS 9 style you’ re familiar with, simply launch Settings → General → Accessibility.

In the Accessibility menu, scroll quite a bit until you see the entry for “Home Button” and select it. In the Home Button menu you’ ll find an entry, turned off by default in iOS 10, labeled “Rest Finger to Unlock”. Toggle it on, as seen below.

You can now press the Home button and, with a single press, both awake and unlock your iOS device.

While we can appreciate why Apple made the change (to facilitate access to secure apps from the lock screen), we also appreciate they left a method in to go back to the iOS 9 way of doing things.

Want to know our #1 pick? Here’s the best iPhone unlock software in 2021:

• Tenorshare 4uKey — Tenorshare 4uKey is the most competent iPhone passcode unlocker due to how fast and expertly the software removes 4/6-digit passcodes, Touch IDs, and Face IDs. Enter DF78-H3P6 at checkout to get 10% off (2021 updated).

Apple products are renowned for their elegant composition, a wide variety of features, and a powerful camera. Using your iPhone is a daily occurrence, but sometimes technology doesn’t work as it should, or our memory isn’t as good as it used to be. What do you do if you’re locked out of your iPhone?

Your first thought is likely to take your phone to the Apple Store, but that can cost you a lot of money and time. You don’t have to spend hundreds of dollars to bypass the iPhone lock screen. Instead, you can use an iPhone passcode unlock software for a fraction of the price.

During my tests, I concluded that the following iPhone passcode hack software bypasses the password screen and gives you access to your iPhone.

Here’s a Short Summary of Best iPhone Passcode Unlock Software (1-Minute Read)

• 1.🥇 Tenorshare 4uKey — #1 best iPhone passcode unlock software of 2021.
• 2.🥈 AnyUnlock — Unlocks Apple ID, iPhone lock screens, iTunes backup passwords, and Screen Time passcodes reliably.
• 3.🥉 Joyoshare iPasscode Unlocker — Removes 4-digit and 6-digit passcodes as well as Face ID and Touch ID screens on its user-friendly interface.
• 4. iMyFone LockWiper — Unlocks screen passcode, removes Apple ID, and bypasses screen time passcodes effectively.
• 5. Dr.Fone – Screen Unlock (iOS) — Offers a simple method to remove all types of lock screens in a few clicks.

• Comparison of the Best iPhone Unlock Software
• How We Tested and Picked the Best iPhone Passcode Unlock Software
• Frequently Asked Questions – iPhone Passcode Unlock Software
• Final Thoughts

🥇1. Tenorshare 4uKey – Best Overall iPhone Unlock Software in 2021

Tenorshare 4uKey is a user-friendly and competent iPhone unlocker that will help you remove your iPhone passcode if you forgot the passphrase or the phone was disabled. It quickly removes every type of password, including 4-digit, 6-digit, Touch ID, and Face ID – even if your iPhone screen is broken.

After downloading the software, Tenorshare 4uKey will present you with three options: Unlock Apple ID, Unlock Lock Screen Passcode, and Bypass MDM. To remove your passcode, click on Unlock Lock Screen Passcode and follow the instructions provided.

Keep in mind that your iPhone must be in recovery mode to complete the passcode reset. If it isn’t, Tenorshare 4uKey will show you how to enter DFU Mode.

Although 4uKey will erase all the data on your device to remove an iPhone Passcode, it can bypass the passcode screen in 10 – 30 minutes. However, this depends on the complexity of the length of the password or password type as Touch ID, and Face ID’s tend to take longer.

A free trial version is available, but it only lets you browse the features instead of using them. To remove the password or use any other features on this iPhone passcode unlock software, you will need to pay $35.95. If you aren’t satisfied with the software’s paid features, you can take advantage of the 30-Day money-back guarantee.

• Removes Every Type of Passcode — No matter if the iPhone passcode has 4 or 6-digits, contains multiple numbers and letters, or requires touch or face technology, Tenorshare 4uKey is capable of removing them in 10 to 30 minutes.
• Easy to Understand Interface — After selecting Unlock Lock Screen Passcode from the software, Tenorshare 4uKey will walk you through every single step. If you’re ever confused, the interface will guide you on how to complete the process.
• Can unlock Apple ID and Bypass MDM Authentication — You won’t need to learn any complicated programming languages to unlock Apple ID or bypass MDM authentication. Both features are included in this iPhone unlock software.
• Multiple Technical Features — Fully compatible with the latest iOS/iPadOS 14, iPhone SE(2ND) and will unlock most iPhone and iPad. Compatible with Windows 10/8.1/8/7/Vista/XP and macOS 10.9 or later.

With 80 millions of satisfied customers online and millions of devices restored, you can be confident that Tenorshare 4uKey will bypass your passcodes on your iDevice quickly. Read our full review of Tenorshare 4uKey here.

Unlocking your iPhone means that you can use it with different carriers.

Your iPhone might be locked to your carrier. Unlocking your iPhone means that you can use it with different carriers. To contact your carrier and unlock your iPhone, use these steps.

If you don’t want to switch carriers and your device is locked because you forgot the passcode, then you don’t need to use the steps in this article. Learn how to reset your passcode.

Apple can’t unlock your iPhone for use with a different carrier. Only your carrier can unlock your iPhone.

Contact your carrier

1. Only your carrier can unlock your iPhone. Contact your carrier and request an unlock. Your account might need to meet requirements for unlocking. After you submit the request, it might take a few days to complete. Contact your carrier to check the status of your unlock request.
2. After your carrier confirms that they unlocked your iPhone, follow the steps below.

If you have a SIM card from a carrier other than your current carrier

Use these steps to finish unlocking your iPhone:

1. Remove your SIM card.
2. Insert the new SIM card. Your device will activate.

If you don’t have another SIM card to use

Use these steps to finish unlocking your iPhone:

1. Back up your iPhone.
2. After you make a backup, erase your iPhone.
3. Restore your iPhone from the backup you just made.

Get help

You might see this message on your computer or on your iPhone: “The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported carrier store.”

If you see this message on your device with iOS 14, use these steps:

1. Go to Settings > General, and tap About.
2. Under Carrier Lock, you should see a message that says “No SIM restrictions.” If you don’t see that message, contact your carrier.

If your device is on iOS 13 or earlier, use these steps:

1. Contact your carrier to make sure that they applied the unlock in their system.
2. Restore your iPhone to factory settings.
3. Restore your iPhone from a backup.

Sick of pressing the home button twice as much to unlock your iPhone after upgrading to iOS 10? Us too. Find out how to restore the default iOS 9 TouchID behavior.

With the latest release of iOS 10, Apple made a significant change in the way the Home Button works to unlock your device. Although Apple had their reasons, for example, to give you more options while the phone is locked by swiping left (Launch Camera App) or right (access information from your apps), for the majority of us, this added step to press the button to unlock the phone is driving us crazy.

Now don’t get me wrong, I get it. This is innovation! Well, think about this Apple (or perhaps you already did…), many of us long-time Apple device users have likely run into failures of the Home button after several years of use. Now factor in this new requirement to continuously press it to unlock the device. Sounds like a disaster to me, at least on iOS 6s devices and earlier.

So, let’s not waste any more time and get right to what you want – How to disable the extra click to unlock an iPhone or iPad on iOS 10.

Restore iOS 9 Touch ID Default Behavior on Apple Devices using Rest Finger to Open

While trying to find this, I noticed that Apple made an unusually strong effort to bury it deep in the iOS settings. Thankfully, the option is there.

Step 1 – Tap Settings > General > Accessibility > Home button. Toggle on Rest Finger to Open.

Your Apple device Home button will now behave just like it did in iOS 9 and earlier. Goodbye, “Press home to open.”

When combined with new functionality such as Raise to Wake and the old method of unlocking your Apple device, the experience is so much nicer. I don’t know why Apple didn’t make this the default. Oh yeah, Widgets. If you’re using a device such as an iPhone 6 or later, which supports Raise to Wake, you get the best of both worlds. You can review widgets if needed and easily unlock the device. For owners of older iPhones, this might be a good reason to upgrade to one of the more recent models.

iOS 10 otherwise is a great update with numerous refinements throughout. If you haven’t updated yet, make sure you check out our previous article for what you can do to prepare. If you want to find out what new in iOS 10, check out our rundown of some of the new features and functions.

Tell us what you think, do you like the old or new way or are you still running an older version of iOS?

Use CheckM8 Software to Bypass iOS 14.4 iCloud Activation Lock Screen on iPhone & iPad

• Security Update iOS 14.4
• iOS 14.4 Bypass Activation Lock
• How to Use CheckM8 Software to bypass iCloud on iPhone & iPad Running on iOS 14.4
• New iOS 14.4 Features & Bugs fix List

Release of the latest iOS version 14.4 just happened and the updates it contains raised some concerns in the Apple community. The reason is that the major part of the update was related to the security protection issues which were found on devices running on iOS 14 and iPadOS 14. The good news is that iOS 14.4 and iPadOS 14.4 patches these issues which makes update to iOS 14.4 a must. For this reason, our recommendation is to update your iPhone and/or iPad to the latest version at your earliest convenience.

CheckM8 Users can update their devices to the latest iOS & iPadOS version without any concern as Remove iCloud Activation Lock Screen Software is ready to bypass Activation Lock on the supported devices on iOS 14.4 and iPad OS 14.4, which are:

• iPhones SE, 6, 6S, 7, 7 Plus, 8, 8 Plus and X
• iPad Air (1, 2), iPad Mini (2, 3, 4), iPad (5, 6, 7), iPad Pro (1, 2), iPad Pro (9.7 & 10.5 in.)

Devices security is always a top priority both for Apple and for users. Therefore, below you’ll find all the information available on security related updates implemented in iOS 14.4 and iPadOS 14.4.

Security Update iOS 14.4

All the information available on the security protection issue patched in iOS 14.4 and iPadOS 14.4 is available in the Apple’s update note released on January 26, 2021 and here it is:

iOS 14.4 Kernel Update

iOS 14.4 WebKit Update

Some of Apple’s statements raised concerns among users as they said that “Apple is aware of a report that this issue may have been actively exploited”. This says that Apple actually found a hole in their operating systems and has proof that it may have been exploited by someone. But now it looks like this hole was patched in the iOS 14.4 release and we have nothing to worry about.

The same update note says: “Apple doesn’t disclose, discuss, or confirm security issues until an investigation has occurred and patches or releases are available”. No other information was released to the public as at now but they promise to provide more details soon.

iOS 14.4 Bypass Activation Lock

iCloud Activation Lock is the security tool developed by Apple to protect their devices from unauthorized use. If iPhone or iPad is stuck on Activation Lock Screen, you are required to enter Apple ID and password it was originally activated with. In case you do not remember Apple ID or password used for your device activation, you can turn to Apple Service with original receipt to prove the ownership and they will help you out. But if you don’t have the receipt, or bought a used device with Activation Lock in the aftermarket and can’t contact the previous owner to solve this problem, you should bypass Activation Lock screen using a software you can trust.

CheckM8 Software is your solution. This trusted tool will bypass iCloud Activation Lock on supported iOS 14.4 devices in 1 click. No Apple ID or password entering is required to unlock your iPhone or iPad. You can also use your device with your own Apple ID once the bypassing process is complete.

How to Use CheckM8 Software to bypass iCloud on iPhone & iPad Running on iOS 14.4

CheckM8 Software is capable of bypassing iCloud Activation Lock on iOS 14.4 devices. Remove iCloud Activation Lock software designed by the CheckM8 team is easy to use even for inexperienced users with no tech background. Clear step-by-step guidelines are provided in on-screen guide which makes the bypassing process as easy as possible.

The entire iCloud Activation Lock bypassing process will last for a minute. Three simple you should take are:

• Download CheckM8 Software, install it on your Mac computer, and connect your iPhone/iPad/iPod to it.
• Software will verify whether your device is supported.
• Place your order and remove the Activation Lock Screen on your iPhone or iPad on iOS 14.4

CheckM8 Software offers Activation Lock bypass service in two options: with GSM module activation and without it. You can choose the option you need but if you need GSM module activation option, please read the service description carefully to make sure your device is supported.

New iOS 14.4 Features

Security protection issues were the main focus of iOS 14.4 update. But the latest iOS version also contains a range of new features, improvements and bugs fixes for iPhones and iPads operating. You can familiarize yourself with these features below.

Improvements for iPhone on iOS 14.4:

Bugs fixed:

Improvements for iPads on iPadOS 14.4

Bugs fixed:

If you are still considering your device updating to iOS 14.4, our advice is to update. This way you’ll secure your device and CheckM8 Software will take care of iCloud Activation Lock Bypass on iOS 14.4. This way, you have nothing to worry about as CheckM8 is always there for you ready to bypass Activation Lock just in 1 click!

Selena Lee

Jun 01, 2021 • Filed to: Remove Device Lock Screen • Proven solutions

Are you concerned about your privacy and would like to secure certain apps on your iOS device? Don’t worry! There are plenty of ways to app lock the iPhone and protect your privacy. You can follow the same drill to restrict the usage of certain apps for your kids as well by taking the assistance of the iPhone app lock feature. The app lock for iPhone and iPad options can be used pretty easily. There are plenty of native and third-party solutions out there that you can use. In this post, we will make you familiar with four different techniques on how to lock apps on iPhone and iPad.

Part 1: How to Lock Apps on iPhone using Restrictions?

By taking the assistance of Apple’s native Restrictions to feature, you can app lock the iPhone without any trouble. In this way, you can set up a passcode that needs to be matched before accessing any app. This iPhone app lock is also a great way to restrict your kids from accessing certain apps or making purchases. To learn how to lock apps on iPhone or iPad using Restrictions, follow these steps:

1. Unlock your device and go to its Settings > General > Restrictions.

2. Turn the feature on and set up a passcode for app restrictions. To provide added security, you can set up a passcode that is not similar to your lock screen passcode.

3. Now, you can set up an app lock for iPhone using Restrictions. Simply go to General > Restrictions and turn this feature on for any app of your choice.

4. If you want, then you can also switch this feature off for any app using the same method.

Part 2: Lock Apps on iPhone using Guided Access

Besides the Restrictions feature, you can also take the assistance of Guided Access to lock a certain app on your device. It was originally introduced in iOS 6 and can be used to restrict your device temporarily with the usage of a single app. It is mostly used by parents who would like to restrict their kids from using a single app while lending their devices. Teachers and people with special needs also use Guided Access pretty frequently. To learn how to lock apps on iPhone using Guided Access, follow these steps:

1. To start with, go to your device’s Settings > General > Accessibility and tap on the “Guided Access” option.

2. Turn on the “Guided Access” feature and tap on the “Passcode Settings”.

3. After selecting the “Set Guided Access Passcode” option, you can set up a passcode to use it as an app lock for iPhone.

4. Now, simply launch the app that you want to restrict and tap the Home button three times. This will start the Guided Access mode.

5. Your phone would now be restricted to this app. You can further restrict the usage of certain app features as well.

6. To exit the Guided Access mode, tap the Home screen three times and provide the respective passcode.

Part 3: How to lock apps on iPhone & iPad using App Locker?

Besides the native iPhone app lock solutions, you can also take the assistance of a third-party tool. Though, most of these apps only support jailbroken devices. Therefore, if you wish to use a dedicated app lock for iPhone, then you need to jailbreak your device. Needless to say, getting your device jailbroken has its perks and demerits. If you don’t want to jailbreak your device, then you can simply take the assistance of the above-mentioned solutions.

Though, if you have a jailbroken device and would like to app lock the iPhone, then you can also use AppLocker. It is available at Cydia’s repository and can be purchased for just $0.99. It can be installed on your jailbroken device to get an added level of security. Not just apps, it can also be used to lock certain settings, folders, accessibilities, and more. To learn how to lock apps on iPhone using AppLocker, follow these steps:

1. Firstly, get AppLocker on your device from As of now, it works on iOS 6 to 10 versions.

2. After installing the tweak, you can go to Settings > Applocker to access it.

3. To access the feature, make sure that you have “Enabled” it (by turning it on).

4. This will let you set up a passcode to lock the apps and settings of your choice.

5. To app lock the iPhone, visit the “Application Locking” feature on your device.

6. From here, you can turn on (or off) the locking feature for apps of your choice.

This will let your app lock the iPhone without any trouble. You can also go to the “Reset Password Phrase” to change the passcode.

Part 4: How to lock apps on iPhone & iPad using BioProtect?

Just like Applocker, BioProtect is another third-party tool that works only on jailbroken devices. It can also be downloaded from Cydia’s repository. Apart from apps, you can also use BioProtect to lock settings, SIM features, folders, and more. It is linked to the Touch ID of the device and scans the fingerprint of a user to grant (or deny) the access to any app. The app only works on iPhone 5s and later devices, having a Touch ID. Though, you can also set a passcode as well if your Touch ID is not working. To use BioProtect app lock for iPhone, follow these steps:

1. Firstly, get the BioProtect app lock iPhone on your device from the right

2. To access the tweak’s panel, you need to provide your fingerprint access.

3. Place your finger on your Touch ID and match its print.

4. This will let you access the BioProtect app settings.

5. Firstly, enable the app by turning the respective feature on.

6. Under the “Protected Applications” section, you can see a list of all the major apps.

7. Simply turn on (or off) the feature of the app that you wish to lock.

8. You can also go to the “Touch ID” feature to further calibrate the app.

9. After setting the lock, you would be asked to authenticate using your fingerprint to access the protected app.

By following these solutions, you would be able to learn how to lock apps on the iPhone without much trouble. We have provided both, third-party as well as native solutions to app lock the iPhone in a secure manner. You can go with your preferred option and provide an added layer of security on your device to keep it safe.

You can capture packet traces from your iPhone, iPad, or iPod touch using Airtool 2. A packet trace capture from an iOS device records traffic at the network layer (Layer 3) passing through all interfaces, including Wi-Fi, AWDL, and cellular.

Packet traces are useful for investigating complex network problems related to connectivity and performance. For example, you can use packet captures to validate the network’s quality of service configuration or analyze under which circumstances Wi-Fi or cellular handoff occurs.

iPhone packet trace.

To capture traffic from your iOS device, Airtool 2 uses a tool called Remote Virtual Interface (RVI). RVI is a mechanism that allows you to create a virtual network interface on your Mac and use tools like tcpdump to capture packets from the iOS device attached to that virtual interface.

The process outlined by Apple to use RVI is very much manual. You connect your device to your Mac, find out the UUID of the device, use the UUID and a command-line interface tool to create the RVI for the device, and then do the capture using tcpdump by passing the name of the RVI interface and the desired tcpdump options. Airtool 2 automates this process and makes capturing traffic from your iPhone, iPad, or iPod touch a 1-click operation.

Get started

If you haven’t already, install Xcode from the Mac App Store. When you first launch Xcode and install the additional required components, it installs the rvictl tool.

You may verify that rvictl is correctly installed by opening Terminal and typing:

If you get the message command not found: rvictl , then rvictl is not installed or cannot be found. To troubleshoot RVI, see Troubleshooting the Remote Virtual Interface (RVI) in Troubleshooting Packet Traces.

On a Mac with Apple silicon, you must also enable System Extensions. To learn more about enabling system extensions, see About system extensions and macOS.

System extensions need to be enabled on a Mac with Apple silicon.

Note: If you’re still unable to capture a packet trace after enabling system extensions, go to System Preferences > Security & Privacy > General and click “Allow” to finish the installation of Apple’s system extension required to use the RVI tool.

Capture iOS packet traces

After installing the RVI tool, capturing from your iPhone, iPad, or iPod touch using Airtool 2 is straightforward:

1. Connect your device to your Mac via USB.
2. Choose the capture packet trace option for the connected iOS device from the Airtool 2 menu.

Capture iPhone packet trace option.

When you choose to capture from your iPhone, iPad, or iPod touch, Airtool 2 automatically creates the remote virtual interface for the device and starts the capture. When the capture ends, Airtool 2 removes the remote virtual interface.

About iOS packet traces

Because RVI represents the entire network stack of the iOS device, you cannot target a specific interface (e.g., Wi-Fi or cellular) on your iOS device as you would do on the Mac, so Airtool 2 saves information about the interface in the packet metadata. Then, in Wireshark, for example, you can choose to display the interface name for each packet.

You can add a column to display the interface name in Wireshark.

You can also filter the trace based on that interface. For example, if you only want to display traffic from the AWDL interface, use the filter expression frame.interface_name == “awdl0”

Troubleshooting

Making sure RVI is installed and functional can be challenging, especially on a Mac with Apple silicon, but once RVI’s working, capturing from your iPhone, iPad, or iPod touch should work without any issues. However, here we describe two problems that may prevent you from capturing from your device successfully and how to resolve them:

I’ve connected my device, but I can’t see it listed in the Airtool 2 menu.

Your iPhone, iPad, or iPod touch will be available to capture packet traces in Airtool 2 only if you choose to accept the device to trust the Mac when you connect it to the computer for the first time. To learn more about the “Trust This Computer” alert, see About the “Trust This Computer” alert on your iPhone, iPad, or iPod touch. Similarly, you may need to unlock your iPhone, iPad, or iPod touch so that Airtool 2 can see your device and capture traffic from it.

The capture fails with “Unable to create or open capture interface.”

On a Mac with Apple silicon, the first time you try to capture traffic from your device after enabling System Extensions, the capture may fail because macOS needs your permission to load or update the system extension that the RVI tool requires to function. Go to System Preferences > Security & Privacy > General and click “Allow” to allow the system extension. After restarting, Airtool 2 should be able to use RVI to capture traffic from the device.

You need to authorize the system extension after the first time Airtool 2 tries to use RVI.

If you’re still unable to capture from your device, please contact us.

Conclusion

Packet traces are useful to investigate complex network problems. Airtool 2 uses Apple’s Remote Virtual Interface tool to capture packet traces from your iPhone, iPad, or iPod touch with a single click. Additionally, as with other types of captures, Airtool 2 advanced features such as capture limits, file rotation, and live captures are available when recording packet traces from your device.

Microsoft Intune can help you manage iOS/iPadOS Activation Lock, a feature of the Find My iPhone app for iOS/iPadOS 8.0 and later devices. Activation Lock is enabled automatically when a user opens the Find My iPhone app on a device. After it is enabled, the user’s Apple ID and password must be entered before anyone can:

• Turn off Find My iPhone
• Erase the device
• Reactivate the device

How Activation Lock affects you

While Activation Lock helps secure iOS/iPadOS devices and improves the chances of recovering a lost or stolen device, this capability can present you, as an IT admin, with a number of challenges. For example:

• A user sets up Activation Lock on a device. The user then leaves the company and returns the device. Without the user’s Apple ID and password, there is no way to reactivate the device.
• You need a report of all devices that have Activation Lock enabled.
• You want to reassign some devices to a different department during a device refresh in your organization. You can only reassign devices that do not have Activation Lock enabled.

To help solve these problems, Apple introduced Activation Lock disable in iOS/iPadOS 7.1. Disable Activation Lock lets you remove the Activation Lock from supervised devices without the user’s Apple ID and password. Supervised devices can generate a device-specific Activation Lock bypass code, which is stored on Apple’s activation server.

Supervised mode for iOS/iPadOS devices lets you use Apple Configurator to lock down a device and limit functionality to specific business purposes. Supervised mode is used only for corporate-owned devices.

You can read more about Activation Lock on Apple’s web site.

How Intune helps you manage Activation Lock

Intune can request the Activation Lock status of supervised devices that run iOS/iPadOS 8.0 and later. For supervised devices only, Intune can retrieve the Disable Activation Lock code and directly issue it to the device. If the device has been wiped, you can directly access the device by using a blank user name and the code as the password.

The business benefits of using Intune to manage Activation Lock are:

• The user gets the security benefits of the Find My iPhone app.
• You can enable users to do their work and know that when a device needs to be repurposed, you can retire or unlock it.

Before you start

Before you can disable Activation Lock on devices, you must enable it by following these instructions:

1. Configure an Intune device restriction profile for iOS/iPadOS using the information in How to configure device restriction settings.
2. In the device restriction settings for iOS/iPadOS, under the General settings, enable the option Activation Lock.
3. Save the profile, and then assign it to the devices on which you want to manage Disable Activation Lock.

How to use Disable Activation Lock

After you disable the Activation Lock on a device, if the Find My iPhone app is started, a new Activation Lock is automatically applied. Because of this, you should be in physical possession of the device before you follow this procedure.

The Intune Disable Activation Lock remote device action removes the Activation Lock from an iOS/iPadOS device without requiring the user’s Apple ID and password. After you disable the Activation Lock, the device turns on Activation Lock again when the Find My iPhone app starts. Disable the Activation Lock only if you have physical access to the device.

On the Intune blade, select Devices.

On the Devices blade, select All devices.

On the list of devices that you manage, select the Disable Activation Lock device remote action.

Go to the device’s “Hardware” section, and then copy the Activation Lock bypass code value under Conditional Access.

Copy the bypass code before you wipe the device. If you reset the device settings before you copy the code, the code is removed from Azure.

Go to the Overview blade for the device, and then select Wipe.

After the device is reset, you are prompted for the Apple ID and password. Leave the ID field blank, and then enter the bypass code for the password. This removes the account from the device.

Next steps

You can examine the status of the unlock request on the details page for the device in the Manage devices workload.

One of the smaller frustrations of the coronavirus pandemic is unlocking your iPhone with Face ID while wearing a mask. If you have an iPhone with Touch ID, you won’t need to punch in your passcode every time Face ID fails since you can use your fingerprint. But for those of us without Home buttons, unlocking our iPhones just got a lot easier — even if we’re wearing a mask.

The only requirements? You need iOS 14.5 and an Apple Watch with watchOS 7.4. With these, you can unlock your iPhone with both your face and your Apple Watch. When you wake your iPhone, it will still attempt to scan your face. If it detects that you’re wearing a mask, it defers to your Apple Watch. As long as your watch is in range and unlocked, your iPhone will open up.

This new feature is a great step for those of us entrenched in the Apple ecosystem. If that applies to you, you should take full advantage and consider changing your numeric passcode to an alphanumeric password. That way, you can give your iPhone the same level of security you give, say, your Mac, all while avoiding plugging in a long and complex password every time Face ID fails.

Previously, the only way to unlock your iPhone without taking off your mask or entering a passcode was to jailbreak and install a tweak like IntelligentPass, which acts similar to Google’s Smart Lock feature on Android, where your iPhone will unlock itself in certain situations. For example, when connected to a specific Wi-Fi network or during a specific time of day.

Step 1: Update Your Devices (If Not Already Done)

To enable this feature, your iPhone needs to be running iOS 14.5 or later, and your Apple Watch needs to be running at least watchOS 7.4. So make sure to update your devices if you haven’t already. If you don’t have an Apple Watch, this is a good reason to get one, and Amazon usually has good deals:

• Shop Apple Watch Series 6: GPS + Cellular | GPS Only
• Shop Apple Watch SE: GPS + Cellular | GPS Only
• Shop Apple Watch Series 5: GPS + Cellular | GPS Only
• Shop Apple Watch Series 4: GPS + Cellular | GPS Only
• Shop Apple Watch Series 3: GPS + Cellular | GPS Only

Also, before continuing, know that your Apple Watch needs to be paired with your iPhone already, both devices need Wi-Fi and Bluetooth turned on, your Apple Watch needs a passcode with wrist detection enabled, the Watch needs to be on your wrist and unlocked, and you need the mask on your face, obviously.

Step 2: Enable the Feature

On your iPhone, head over to Settings –> Face ID & Passcode, then enter your passcode. Scroll down and tap the switch next to “(Your Name’s) Apple Watch” under Unlock with Apple Watch. Your iPhone will prompt you with a pop-up, letting you know about how this feature works. Just tap “Turn On,” give iOS a moment to load, and presto!

Step 3: Unlock Your iPhone with a Mask On

Now, your Apple Watch can — and will — unlock your iPhone while you’re wearing a mask. Just raise your Apple Watch so that it’s awake and unlocked, then wake your iPhone by raising it or tapping its display and glance at the lock screen. When it sees your glance, it will look for your Apple Watch, which will then unlock your iPhone for you and show a notification saying that it’s unlocking your iPhone.

When your iPhone is unlocked, your Apple Watch will then display that it unlocked it and provide haptic feedback in case you don’t want to look at your Watch display. You can then swipe up from the bottom of your iPhone’s display to open to the home screen or last used app.

Note that this only works for unlocking your iPhone. You can’t use it with Apple Pay, with passwords stored in Keychain, or in password-protected apps. For those, you’ll have to type your iPhone passcode or use your Apple Watch for Apple Pay when masked.

How to Temporarily Disable This Feature

One neat backstop Apple put into this feature is the ability to disable your Apple Watch from unlocking your iPhone temporarily. It allows you to quickly force your iPhone to only accept Face ID or your passcode the next time it unlocks — without disabling Apple Watch unlocking altogether.

You can do this from the Apple Watch notification that appears when unlocking your iPhone. Just tap the “Lock iPhone” button on your watch, and your iPhone will require Face ID or your passcode the next time you unlock your device. Once you do use Face ID or enter your passcode, this block resets, and your Apple Watch will be able to unlock your iPhone again using the steps above.

Watch It Straight from Apple

Apple has a simple video guide on its YouTube channel you can watch below. It doesn’t provide all the details you should know about, but that’s all listed above, so you should be good.

But What About Touch ID Models?

OK, so you don’t have the problem of masks obfuscating your facial features for Face ID, but you do have another problem: gloves. When it’s super cold out, you’re likely wearing gloves. Even if you have a pair of touchscreen-friendly gloves, you won’t be able to use Touch ID to unlock your iPhone unless you take a glove off.

It’s unlikely Apple will add a similar feature for this dilemma since Touch ID would need to be able to detect that you’re trying to use it. But Touch ID would not know when your wearing gloves. If there could be a way to detect that, there would likely be many unintentional unlocks whenever your iPhone’s in your pocket.

Keep Your Connection Secure Without a Monthly Bill. Get a lifetime subscription to VPN Unlimited for all your devices with a one-time purchase from the new Gadget Hacks Shop, and watch Hulu or Netflix without regional restrictions, increase security when browsing on public networks, and more.